Order by 1PM for next day delivery
on standard off the shelf products
Major Suppliers of DPC Products Online

Cavibrick Sleeves (1 brick sleeve)

Available in 1 variation
  • Black polypropylene.
  • Length 300mm.
  • Special lengths to order.
£3.17 + VAT

Gallery

Use

(1 brick sleeve 75mm x 225mm)  Sleeve attachments to provide ventilation to specific areas.

introduction

A range of straight sleeves to accommodate one, two or three cavibricks. (High throughput cavibricks are designed to be used singularly or can be locked together to form larger brick-sized ventilating units.) When connected to a cavibrick the combined length is sufficient to accommodate all popular cavity wall widths.

The three standard straight sleeves are: 75mm x 225mm, 150mm x 225mm and 225mm x 225mm. We recommend sleeves are protected with a cavitray where they pass through the cavity, to comply with NHBC/best practice. (See Sleeve and Duct Cavitrays.)

Data

  • Black polypropylene.
  • Length 300mm.
  • Special lengths to order.
  • 75mm x 225mm,
  • 150 x 225mm
  • 225mm x 225mm.
Flush Slate Ventilator Flush Slate Ventilator
£22.87 + VAT
To provide ventilation route via slated roof finish. Introduction The Flush Slate Ventilator promotes an airflow rating of 10,000mm2 and has...
Type VF Type VF
£101.43 + VAT
To provide flashing and ventilation at roof and wall intersections. Introduction Where a monopitch roof abuts a masonry wall there is a requirement...
Type ERV Type ERV
£69.03 + VAT
To provide ventilation within flat and low pitched roofs. Introduction The Type ERV External Roof Ventilator is designed to permit the roof void...
Type SV-FL Type SV-FL
£3.26 + VAT
Permits entry of air via soffit. Introduction The Type SV-FL is a strip soffit ventilator designed for use with flat and sloping soffit and has...