Order by 1PM for next day delivery
on standard off the shelf products
Major Suppliers of DPC Products Online

Type CV Corbel Ventilator

Available in 3 variations
  • PVCU, black, white.
  • 2400mm lengths x 42mm height x 28mm depth.
  • Use hardedge to ensure felt clears front face.
  • Suitable for new and existing work.
  • Integral insect screening.
  • Adjustable tie fixing.
  • Set-back anchoring position.
£5.46 + VAT
£5.46 + VAT
£5.46 + VAT

Gallery

Use

To provide air ventilation at eaves level, where a running masonry corbel is constructed.

Introduction

The Type CV Corbel Ventilator is designed to be incorporated above a running masonry corbel built of brick, stone or similar. The ventilator has a slotted vertical front face, providing the equivalent of a 10mm continuous air opening. To the rear of the ventilator, the base has a dovetail anchoring slot which permits the securing ties to be positively attached at any position to suit the corbel masonry joints.

The Type CV provides an easy way of satisfying the statutory roof ventilation requirements where a masonry corbel exists.

Data

  • PVCU, black, white.
  • 2400mm lengths x 42mm height x 28mm depth.
  • Use hardedge to ensure felt clears front face.
  • Suitable for new and existing work.
  • Integral insect screening.
  • Adjustable tie fixing.
  • Set-back anchoring position.
Type W Type W
£0.56 + VAT
Dual-function product acts as a cavity ventilator permitting the cavity to breathe.Also acts as a weep to evacuate water from lintels, DPC's and Cavity...
Type W Extension Duct Type W Extension Duct
£0.99 + VAT
To extend Type W to accommodate masonry of greater thickness. Introduction The Type W extension duct is designed to push-fit onto the Type W Caviweep/Cavivent.It...
Cavibrick Rectangular to Round Converter Sleeve Cavibrick Rectangular to Round Converter Sleeve
£3.86 + VAT
Permits cavibrick to be connected to standard pipe. Introduction Where it is proposed to provide ventilation to a remote room, under floor area...
Type W Render Cover Type W Render Cover
£11.03 + VAT
Protective front cover to protect grille of Type W during single or two-coat rendering. Introduction The Type W caviweep/cavivent is sometimes...