Order by 1PM for next day delivery
on standard off the shelf products
Major Suppliers of DPC Products Online

Type R Cavitray

Available in 3 variations
  • Type R size 1 = 2400mm x 135mm overall width with V section of 25mm x 25mm.
  • Type R size 2 = 2400mm x 160mm overall width with V section of 50mm x 50mm.
  • Angles 450mm x 450mm.
  • Standard 1.5mm solid polypropylene, black.
  • DPC Securtex top textured finish.
  • Also available in austenitic stainless steel.
  • Dual function product acting as water-check and also integral shuttering tray.
  • Upturned profile eliminates dangers of capillary action and pooling water.
£11.39 + VAT
£22.63 + VAT
£25.90 + VAT

Gallery

Use

Integral shuttering tray/water check former. Also suitable for closing cavities.

Introduction

The Type R is a two-function cavitray. When intermediate upper floors of concrete are cast in-situ, it is utilised to close the cavity and prevent concrete entering. In addition, the Type R introduces a water check to the underside of the concrete, to prevent water tracking across the cavity.

The upturned profile (rather than the down-turned profile) is not susceptible to accommodating course aggregate during the pouring of concrete, which might encourage capillary action if air voids are present and permit perimeter pooling.

Data

  • Type R size 1 = 2400mm x 135mm overall width with V section of 25mm x 25mm.
  • Type R size 2 = 2400mm x 160mm overall width with V section of 50mm x 50mm.
  • Angles 450mm x 450mm.
  • Standard 1.5mm solid polypropylene, black.
  • DPC Securtex top textured finish.
  • Also available in austenitic stainless steel.
  • Dual function product acting as water-check and also integral shuttering tray.
  • Upturned profile eliminates dangers of capillary action and pooling water.
Type X Catchment Cavitray 21-25 Long Type X Catchment Cavitray 21-25 Long
£8.57 + VAT
Preformed DPC cavitray complete with an attached ready-shaped lead flashing to form a stepped cavity DPC and flashing at the abutment of a pitched roof...
Type P Cavitray Type P Cavitray
£29.57 + VAT
To weatherproof parapet walls. Introduction The Type P cavitray is a rigid horizontal DPC, manufactured in long lengths. Preformed angles enable...
Type J DPC Support and Closer Type J DPC Support and Closer
£13.50 + VAT
Provides DPC support and closes cavity under parapet copings. Also provides means of closing cavity in open eaves and other eaves details. Introduction Parapet...
Type G Cavitray Type G Cavitray
£13.47 + VAT
Provides reliable DPC system for general purpose applications including changes of level, diaphragm walls, porch and garage roof intersections, building...